Follow Us On
Follow Us On
#### OVERVIEW
An ECHO Chainsaw is built to tackle the toughest jobs. Whether you’re pruning limbs, cutting firewood, or taking down a whole tree, each ECHO Chain Saw is designed to provide long, trouble-free life. You want a chainsaw that starts easy, runs smooth, and provides years of dependable performance.
#### FEATURES
* 34.4cc commercial grade gas engine
* Lower weight means less fatigue and greater productivity
* i-30(tm) starter reduces starting effort by 30%
* 3-point spring vibration reduction system for operator comfort
* Air Injection Air Cleaner cleans air and reduces maintenance
* Automatic clutch-drive oiler only operates when the chain is moving reducing oil consumption
* Great for felling trees, pruning lower branches, cutting firewood and storm clean-up
* Highest power-to-weight ratio
* Side access chain tensioner for quick chain adjustments
#### SPECIFICATIONS
* Engine Displacement (cc) 34.4
* Oil Capacity (fl oz) 7.8
* Engine Displacement (cu in) 2.1
* Dry Weight (lbs) 18.2
* Starting System i-30
* Sprocket Cover Plastic
* Ignition System
* Bar Type Laminated
* Carburetor Yes
* Sprocket Type Spur
* Oiling System Automatic Clutch-Driven
* Handle Plastic
* Vibration Reduction System 3-Point Spring System
* Fuel Capacity (fl. oz.) 9.5
* Available Bar Lengths (in) 16
* Warranty 1 yr commercial / 5 yr consumer
Original price was: $499.95.$469.95Current price is: $469.95.
Savings: $30.00
CS3510-16
| Manufacturer : | Echo |
|---|---|
| Model : | CS-3510 |
Interest rates vary by person and trailer. All payments are estimates. Tax, title and any other fees are extra.
Recommended for You
Lightweight, rust-proof polyethylene hopper paired with a reinforced, powder-coated steel frame for maximum durability
A latching, molded poly lid protects material from the elements.
The two high-torque 12-volt electric motors provide quiet, reliable, independent control over the auger and spinner mechanisms. The spinner motor is sealed inside a weather-resistant housing, protecting it from corrosion.
The SPEED-CASTER™ 525 tailgate spreader features a 10″ spinner made of nylon/glass reinforced resin, and delivers a spread pattern of up to 30′.
The SPEED-CASTER™ 900 tailgate spreader features a 12″ steel spinner (shown above) and delivers a spread pattern of up to 40′.
An inverted V comes standard and helps keep sufficient material weight off of the auger, ensuring smooth startup and flow of material. It is directly connected to the vibrator to help reduce bridging and keep material moving to the auger.
| Specification | 80152-1 | 80190-1 |
|---|---|---|
| Capacity | 5.25 cu ft | 9.00 cu ft |
| Spreading Width | Up to 30′ | Up to 40′ |
| Approx. Weight (Empty) | 160 lb | 180 lb |
| Overall Dimensions (LxWxH) | 20.5″ x 38″ x 34″ 20 ½” x 38″ x 34″ |
24″ x 52″ x 36″ |
| Auger (Diam. x Length) | 3″ x 14″ Heavy-Duty Solid Steel | 3″ x 20″ Heavy-Duty Solid Steel |
| Spinner Size | 10″ | 12″ |
| Specification | 80152-1 | 80190-1 |
|---|---|---|
| Model Number | 525 | 900 |
| Vehicle Compatibility | UTVs, Tractors, ½, ¾, or 1-Ton Pickup Truck | Tractors, ¾, or 1-Ton Pickup Truck |
| Material Compatibility | Bagged Salt / Ice Melt, Bulk Salt & Fine Materials* | Bagged Salt / Ice Melt, Bulk Salt & Fine Materials* |
| Motor | Dual Electric, 12V ⅓ HP | Dual Electric, 12V ⅓ HP |
| Hopper Construction | Polyethylene | Polyethylene |
| Available Mounts | Standard 2″ Receiver, 3-Point Combo Mount | Pivot Mount, 2″ Receiver Mount (Requires Adapter Mount), 3-Point Hitch Mount |
Lightweight, rust-proof polyethylene hopper paired with a reinforced, powder-coated steel frame for maximum durability
Material is delivered by a vertical steel auger and maintains a steady output while preventing wasteful spills
A latching, molded poly lid protects material from the elements.
A fully enclosed ⅓ HP, 12-volt electric motor is mounted inside a sealed housing, protecting it from corrosion.
Models 500 and 1000 both feature a durable 10″ polyurethane spinner that delivers a spread pattern of up to 30′.
Model 2500 comes standard with a large, 15″ polyurethane spinner that delivers a spread pattern of up to 30′.
On the Model 2500 spreader, a specialized “saw tooth” feed gate and auger design combine to deliver complete, reliable flow control with positive shut-off, eliminating spillage and waste.
Ratchet straps are provided standard for additional spreader stability on the Model 500 and 2500 spreaders only.
| Specification | 95331 | 68810 | 96050-2 |
|---|---|---|---|
| Capacity | 5.00 cu ft | 8.00 cu ft | 8.50 cu ft |
| Spreading Width | Up to 30′ | Up to 30′ | Up to 30′ |
| Approx. Weight (Empty) | 75 lb With Mount | 105 lb Without Mount | 131 lb With Mount |
| Overall Dimensions (LxWxH) | 21″ x 39″ x 34″ | 19 ½” x 50 ½” x 35″ | 25″ x 50″ x 42″ |
| Auger (Diam. x Length) | 2 ⅝” x 6″ | 2 ⅝” x 6″ | 2 ⅝” x 9″ |
| Spinner Size | 10″ | 10″ | 15″ |
| Specification | 95331 | 68810 | 96050-2 |
|---|---|---|---|
| Model Number | 500 | 1000 | 2500 |
| Vehicle Compatibility | UTV, Tractor, ½, ¾, or 1-Ton Pickup Truck | Tractor, ½, ¾, or 1-Ton Pickup Truck | Tractor, ½, ¾, or 1-Ton Pickup Truck |
| Material Compatibility | Bagged Salt / Ice Melt, Fine Materials | Bagged Salt / Ice Melt, Fine Materials | Bagged Salt / Ice Melt, Fine Materials |
| Motor | ⅓ HP | ⅓ HP | ⅓ HP |
| Hopper Construction | Polyethylene | Polyethylene | Polyethylene |
| Available Mounts | Standard Class III Receiver Hitch Mount | Optional Fixed Mount, Class IV Hitched Mount, Dual Swing Mount | Standard Class IV Hitch Mount |
Lightweight, rust-proof polyethylene hopper paired with a reinforced, powder-coated steel frame for maximum durability
Tailor your application by choosing between a vertical steel auger for efficient salt delivery or a high-flow electric gate designed for fine materials
The QUICK-CASTER 300 features a heavy-duty 3” vertical auger for a steady, consistent flow of bagged rock salt to the spinner. This allows you to deliver a consistent spread of salt.
The QUICK-CASTER 300G features an electric gate that stops and starts the material flow to the spinner. This allows the LOW-PRO 300G to spread finer granular materials (like calcium flakes and calcium chloride pellets) in a consistent spread pattern.
The spinner motor transmission is electric powered, drawing electricity from the vehicle for quiet, consistent operation. The motor is protected from the corrosive environment by a sealed drive enclosure.
The QUICK-CASTER tailgate spreader features a 10″ spinner made of nylon/glass reinforced resin. It delivers a spread pattern of up to 25′ and provides long-lasting, corrosion-free operation.
The transparent cover keeps material dry and flowing freely, while offering a clear view inside the hopper.
| Specification | 30770 | 30760 |
|---|---|---|
| Capacity | 3.00 cu ft | 3.00 cu ft |
| Spreading Width | Up to 20′ | Up to 25′ |
| Approx. Weight (Empty) | 75 lb | 68 lb |
| Overall Dimensions (LxWxH) | 22″ x 30″ x 30″ | 22″ x 32″ x 30″ |
| Auger (Diam. x Length) | — | 3′ Vertical High-Flow Auger |
| Spinner Size | 10″ Nylon/Glass Reinforced Resin | 10″ Nylon/Glass Reinforced Resin |
| Specification | 30770 | 30760 |
|---|---|---|
| Vehicle Compatibility | UTVs, Tractors, ½, ¾, 1-Ton Pickup Truck | UTVs, Tractors, ½, ¾, 1-Ton Pickup Truck |
| Material Compatibility | Fine Materials | Bagged Rock Salt |
| Motor | 12-volt DC motor mounted in weather-resistant enclosure |
12-volt DC motor mounted in weather-resistant enclosure |
| Hopper Construction | Polyethylene | Polyethylene |
| Available Mounts | 2″ Light-Duty Hitch Mount (Standard) | 2″ Light-Duty Hitch Mount (Standard) |
| Model Number | 300G | 300 |
Lightweight, rust-proof polyethylene hopper paired with a reinforced, powder-coated steel frame for maximum durability
Material is delivered by a vertical steel auger and maintains a steady output while preventing wasteful spills
The specially designed ⅓ HP, 12-volt electric motor and high-torque transmission are fully enclosed for protection from the elements.
The QUICK-CASTER™ 300W wireless electric tailgate spreader features a 10″ spinner made of nylon/glass reinforced resin. It delivers a spread pattern of up to 25′ and provides long-lasting, corrosion-free operation.
The transparent cover keeps material dry and flowing freely, while offering a clear view inside the hopper.
| Specification | 80030 |
|---|---|
| Capacity | 3.00 cu ft |
| Spreading Width | Up to 25′ |
| Approx. Weight (Empty) | 68 lb |
| Overall Dimensions (LxWxH) | 22″ x 30″ x 32″ |
| Auger (Diam. x Length) | 2 ½” x 5 ¾” Vertical High-Flow |
| Spinner Size | 10″ |
| Specification | 80030 |
|---|---|
| Model Number | 300W |
| Vehicle Compatibility | UTVs, Tractors, ½, ¾, 1-Ton Pickup Truck Tractors, UTVs, SUVs, 1-Ton or Smaller Pickups |
| Material Compatibility | Bagged Rock Salt |
| Motor | Electric, 12V ⅓ HP |
| Hopper Construction | Polyethylene |
| Available Mounts | Standard 2″ Receiver, Optional Drop Utility, Trailer, Utility, 3-Point Mounts |
Patented corkscrew material delivery system is optimized to operate in the target range for rock salt spreading best practices. The auger has multiple pitches to help promote smooth, even material flow from the hopper and prevents bridging. The shaftless technology reduces drag on the motor and reduces the overall load on the electrical system.
* Auger Models Only (P150A & P220A)
The large conveyor delivers reliable, smooth, and consistent material flow for heavy, dense materials (like sand and 50/50 mix) while reducing bridging.
* Chain Models Only (P150C & P220C)
Standard lids have molded channels for moisture runoff. Pockets at the end of the lid allow a 2×4 to be inserted for leverage while opening.
Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion-resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble-free use.
* Standard on 1.5 & 2.2 cu yd Auger Models. (P150A & P220A)
* Sold Separately for 1.5 & 2.2 cu yd Chain Models. (P150C & P220C)
Special design allows the hopper to stand on end for easier storage in the off-season and easier installation into the truck bed. Simply remove the two pins, unplug it, and take off the chute before standing up the hopper.
A material delivery extension reduces leaking/ spilling during transport and leads into the patented pre-wet mixing chamber. It also provides a cab-forward design for added stability and weight distribution of the hopper.
* Pre-wet accessory sold separately
Remove the pin, unplug it, and swing the chute from the the driver’s side to the passenger side, providing easy access for maintenance or material unloading. The chute assembly can also be removed for convenient access to the hitch or to stand the hopper up on end during storage.
A protection flap at the end of the conveyor prevents material from spilling out and pooling near the vehicle cab.
* Chain Models Only (P150C & P220C)
Dual variable speed control for hoppers
STANDARD OPTION
Dual Variable Speed Control
#99533 (Option With New Spreader Purchase)
Dual variable-speed control matches material delivery and spread patterns to conditions. Four standard accessory buttons, a dedicated blast button, and digital self-diagnostics (with alerts and an easy-to-read LED display) ensure efficiency and fits modern truck cabs.
FISHER auto speed control
STANDARD OPTION (For Truck Applications Only)
Auto Speed Control
#32850 (Option With New Spreader Purchase)
Gain more insight into spread rates and reduce wasted material—all with a control that provides an interface your operators are already familiar with. The patent pending Auto Speed Control ties directly into the vehicle’s OBD-II port for instant reactions to changes in speed, saving you material and money.
Patented corkscrew material delivery system is optimized to operate in the target range for rock salt spreading best practices. The auger has multiple pitches to help promote smooth, even material flow from the hopper and prevents bridging. The shaftless technology reduces drag on the motor and reduces the overall load on the electrical system.
* Auger Models Only (S150A, S220A, S300A, S400A, S500A)
The large conveyor delivers reliable, smooth, and consistent material flow for heavy, dense materials while reducing bridging.
* Chain Models Only (S150C, S220C, S300C, S400C, S500C)
A material delivery extension reduces leaking/spilling during transport. This provides a more cab forward design, allowing for added stability and weight distribution of the hopper.
When equipped with the optional pre-wet accessory, it leads into the patented pre-wet mixing chamber.
Channels on either side of the hopper allow wires and cables to be easily run from the hopper to the cab for a clean installation.
The end caps are at more of an angle to provide better material flow so the hopper load can be evenly spread with each fill.
For precise material application, the chute assembly can be configured for either pickup truck or flatbed and dump body applications, ensuring you’re always spreading at the optimum height. An extended chute is standard on 3.0, 4.0, and 5.0 cu yd models. Sold separately for 1.5 and 2.2 cu yd models.
The ergonomic, hinged design opens from the driver’s side and swings to the passenger side, providing easy access for maintenance or material unloading. For convenient access to the hitch, the chute assembly can be removed.
An extra-large 16″ polyurethane spinner delivers a broadcast spread pattern of up to 36′ for salt and 24′ for sand and provides long-lasting, corrosion-free performance. The ridges on the spinner ensure an even distribution of material throughout the spread arc.
Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.
* Accessory for 1.5 & 2.2 cu yd Chain Models (S150C & S220C)
* Standard on 1.5 & 2.2 cu yd Auger Models. (S150A & S220A)
* Standard on 3.0, 4.0 & 5.0 cu yd Chain & Auger Models. (S300C, S300A, S400C, S400A, S500C & S500A)
A protection flap at the end of the conveyor prevents material from spilling out and pooling near the vehicle cab.
*Chain Models Only (S150C, S220C, S300C, S400C, S500C)
Dual variable speed control for hoppers
STANDARD OPTION
Dual Variable Speed Control
#99533 (Option With New Spreader Purchase)
Dual variable-speed control matches material delivery and spread patterns to conditions. Four standard accessory buttons, a dedicated blast button, and digital self-diagnostics (with alerts and an easy-to-read LED display) ensure efficiency and fits modern truck cabs.
FISHER auto speed control
STANDARD OPTION (For Truck Applications Only)
Auto Speed Control
#32850 (Option With New Spreader Purchase)
Gain more insight into spread rates and reduce wasted material—all with a control that provides an interface your operators are already familiar with. The patent pending Auto Speed Control ties directly into the vehicle’s OBD-II port for instant reactions to changes in speed, saving you material and money.
Available for Every Job
Please enter your contact information and one of our representatives will get back to you with more information.
