Follow Us On
Follow Us On
Patented corkscrew material delivery system is optimized to operate in the target range for rock salt spreading best practices. The auger has multiple pitches to help promote smooth, even material flow from the hopper and prevents bridging. The shaftless technology reduces drag on the motor and reduces the overall load on the electrical system.
* Auger Models Only (S150A, S220A, S300A, S400A, S500A)
The large conveyor delivers reliable, smooth, and consistent material flow for heavy, dense materials while reducing bridging.
* Chain Models Only (S150C, S220C, S300C, S400C, S500C)
A material delivery extension reduces leaking/spilling during transport. This provides a more cab forward design, allowing for added stability and weight distribution of the hopper.
When equipped with the optional pre-wet accessory, it leads into the patented pre-wet mixing chamber.
Channels on either side of the hopper allow wires and cables to be easily run from the hopper to the cab for a clean installation.
The end caps are at more of an angle to provide better material flow so the hopper load can be evenly spread with each fill.
For precise material application, the chute assembly can be configured for either pickup truck or flatbed and dump body applications, ensuring you’re always spreading at the optimum height. An extended chute is standard on 3.0, 4.0, and 5.0 cu yd models. Sold separately for 1.5 and 2.2 cu yd models.
The ergonomic, hinged design opens from the driver’s side and swings to the passenger side, providing easy access for maintenance or material unloading. For convenient access to the hitch, the chute assembly can be removed.
An extra-large 16″ polyurethane spinner delivers a broadcast spread pattern of up to 36′ for salt and 24′ for sand and provides long-lasting, corrosion-free performance. The ridges on the spinner ensure an even distribution of material throughout the spread arc.
Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.
* Accessory for 1.5 & 2.2 cu yd Chain Models (S150C & S220C)
* Standard on 1.5 & 2.2 cu yd Auger Models. (S150A & S220A)
* Standard on 3.0, 4.0 & 5.0 cu yd Chain & Auger Models. (S300C, S300A, S400C, S400A, S500C & S500A)
A protection flap at the end of the conveyor prevents material from spilling out and pooling near the vehicle cab.
*Chain Models Only (S150C, S220C, S300C, S400C, S500C)
Dual variable speed control for hoppers
STANDARD OPTION
Dual Variable Speed Control
#99533 (Option With New Spreader Purchase)
Dual variable-speed control matches material delivery and spread patterns to conditions. Four standard accessory buttons, a dedicated blast button, and digital self-diagnostics (with alerts and an easy-to-read LED display) ensure efficiency and fits modern truck cabs.
FISHER auto speed control
STANDARD OPTION (For Truck Applications Only)
Auto Speed Control
#32850 (Option With New Spreader Purchase)
Gain more insight into spread rates and reduce wasted material—all with a control that provides an interface your operators are already familiar with. The patent pending Auto Speed Control ties directly into the vehicle’s OBD-II port for instant reactions to changes in speed, saving you material and money.
98510, 98410, 98520, 98420, 98530, 98430, 98540, 98440, 98550 ,98450
Interest rates vary by person and trailer. All payments are estimates. Tax, title and any other fees are extra.
Recommended for You
Durable Stainless Steel Spreader
Invest in long-lasting performance with the Ice Raven Salt Spreader Series by Sno-Way 2000S, featuring robust stainless steel construction in the frame, hopper, and drive support for maximum corrosion resistance. Tackle demanding commercial jobs with confidence, utilizing the advanced RS Controller and inverted Vee system for precise control over material flow and spread patterns up to 30 feet.
Also available in a lightweight Poly Body model.
Need more capacity? Check out our 2.5 Cubic Foot model.
The V-Box 2000 Stainless Steel Salt Spreader
The V-Box Stainless Steel Salt Spreader and Sander is all stainless steel from the custom frame and drive support to the hopper and meant to last. The V-Box stainless steel inside hopper walls are designed for maximum flow of the toughest materials to minimize material bridging.
Our PATENTED Inverted Vee (NOT NEEDED or AVAILABLE on V-Box 10 and V-Box 500) is actually one of the secrets to the success of this V-Box spreader. The design allows the contractor to dial in the specific amount of material that will drop to the auger BASED on the material they are spreading.
The RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your V-Box spreader (not included) See Spec chart for measurements.
RVB2000
2 CUBIC YARD
600 lbs.
108.5
85.7
38 (TOP OF KNOB)
51.8
100.5
12 Volt, 1/3 HP
12 Volt 1/2 HP
16″ Diameter Poly Four Flute
16″ Short Chute, 29″ Long Chute
STAINLESS STEEL
standard
standard
standard
standard
standard
optional
optional
optional
RS Digital Control
optional
N/A
1 TON AND LARGER
Ultimate Control, Consistent Spreading, and Built to Last
Equip your fleet (UTV to Class 5) with the Ice Raven Salt Spreader Series by Sno-Way V-Box 2000 spreader, engineered for commercial durability with a robust frame and superior material flow control thanks to the inverted Vee system. Maximize efficiency and achieve a consistent spread pattern up to 30 feet using the advanced RS Controller for customized operation, even with challenging materials.
Also available in a heavy duty Stainless Steel model.
Need more capacity? Check out our 2.5 Cubic Foot model.
The V-box 2000 Salt Spreader.
The V-Box frame and drive support are a Steel Frame, then it is sealed with an Automotive E-Coat Primer and finally finished with Military Grade Powder Coat – we are obsessed with quality.
The V-Box poly hopper is specifically designed to never collapse. This might seem odd but that is the main reason that poly spreaders don’t last. While we beefed up the construction we added specific tie-down connection points and anti-crush zones. You deserve quality.
Our PATENTED Inverted Vee (NOT NEEDED or AVAILABLE on V-Box 10 and V-Box 500) is actually one of the secrets to the success of this V-Box spreader. The design allows the contractor to dial in the specific amount of material that will drop to the auger BASED on the material they are spreading.
The RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your V-Box spreader (not included). See Spec chart for measurements.
RVB2000
2 CUBIC YARD
352 lbs.
104.8
82
38.4
49.25
97
12 Volt, 1/3 HP
12 Volt 1/2 HP
16″ Diameter Poly Four Flute
16″ Short Chute, 29″ Long Chute
Steel, E Coat, Powder Coat
standard
standard
standard
standard
standard
optional
optional
optional
RS Digital Control
optional
N/A
1 TON AND LARGER
Precision driven spreader system focused on control, efficiency, and consistency.
Tackle winter with the Sno-Way RVB1500 Spreader, featuring a durable, poly hopper and a powerful, enclosed drive system designed for superior material distribution up to 30 feet. Maximize your efficiency and control with the revolutionary RS Controller, allowing precise customization for any spreading job.
Need more capacity? Check out our 2 Cubic Yard or 2.5 Cubic Yard models.
The V-Box frame and drive support starts as High Rolled Steel then it is sealed with an Automotive E-Coat Primer and finally finished with Military Grade Powder Coat – we are obsessed with quality.
The V-box poly hopper is specifically designed to never collapse. This might seem odd but that is the main reason that poly spreaders and sanders don’t last. While we beefed up the construction we added specific tie-down connection points and anti-crush zones. You deserve quality.
Our PATENTED Inverted Vee (NOT NEEDED or AVAILABLE on V-Box 10 and V-Box 500) is actually one of the secrets to the success of this V-Box spreader. The design allows the contractor to dial in the specific amount of material that will drop to the auger BASED on the material they are spreading.
The RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your V-Box spreader (not included). See Spec chart for measurements.
RVB1500
1-1/2 CUBIC YARD
337 lbs.
104.8
82
33.2
49.25
97
12 Volt, 1/3 HP
12 Volt 1/2 HP
16″ Diameter Poly Four Flute
16″ Short Chute, 29″ Long Chute
Steel, E Coat, Powder Coat
standard
standard
standard
standard
standard
optional
optional
optional
RS Digital Control
optional
N/A
3/4 TON AND LARGER
Precision driven salt spreader system focused on control, efficiency, and consistency.
Bring heavy-duty performance to a versatile range of vehicles with the Ice Raven Salt Spreader Series by Sno-Way® V-Box 750 salt spreader, featuring a robust stainless steel frame and the precision of the RS controller. Efficiently manage various materials with the adjustable inverted vee and achieve consistent spread patterns, thanks to its durable construction and enclosed drive system.
Need more capacity? Check out our 1.5 Cubic Yard or 2 Cubic Yard models.
The V-Box frame and drive support starts as High Rolled Steel then it is sealed with an Automotive E-Coat Primer and finally finished with Military Grade Powder Coat – we are obsessed with quality.
The V-box poly hopper is specifically designed to never collapse. This might seem odd but that is the main reason that poly salt spreaders and sanders don’t last. While we beefed up the construction we added specific tie-down connection points and anti-crush zones. You deserve quality.
Our PATENTED Inverted Vee (NOT NEEDED or AVAILABLE on V-Box 10 and V-Box 500) is actually one of the secrets to the success of this V-Box salt spreader. The design allows the contractor to dial in the specific amount of material that will drop to the auger BASED on the material they are spreading.
The RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your V-Box salt spreader (not included). See Spec chart for measurements.
RVB750
.75 Cubic Yard
244 lbs.
87.9″
65.2″
25″
39″
80.25″
12 Volt, 1/3 HP
12 Volt, 1/2HP
16″ Diameter Poly Four Flute
16″ Short Chute, 29″ Long Chute
Steel, E Coat, Powder Coat
standard
optional
standard
standard
standard
optional
optional
optional
RS Digital Control
optional
N/A
1/2 TON AND LARGER
Engineered for precise, efficient material control in demanding winter conditions.
Experience unmatched control and durability with the Ice Raven Salt Spreader Series by Sno-Way V-Box 10 Cubic Foot Salt Spreader, featuring the advanced RS Controller and robust construction suitable for vehicles from UTVs to Class 5 trucks. Effortlessly switch between broadcast and precise drop spreading using the optional hood, ensuring superior material flow and pattern control for any job.
Need more capacity? Check out our .75 Cubic Yard model.
Sno-Way® innovation has made you able to use your V-Box 10 or 500 cubic foot salt spreaders as a broadcast or drop spreader. Use the Sno-Way® exclusive Drop Spreader Hood and attach it to your chute. It gives you a 30”-60” spread. This easy on/off hood allows you to convert your spreader from broadcast to a drop or sander and back again in less than a minute, with no tools.
The V-Box frame and drive support is a high rolled steel, that is sealed with an Automotive E-Coat Primer and finally finished with Military Grade Powder Coat – we are obsessed with quality.
The V-box poly hopper is specifically designed to never collapse. This might seem odd but that is the main reason that poly salt spreaders don’t last. While we beefed up the construction we added specific tie-down connection points and anti-crush zones. You deserve quality.
The RS Controller offers Constant Drive and Auto Mode that allow customization of the independent auger and spinner and vibrator in maximizing material distribution. In addition, the controller operates key accessories such as pre-wetting systems and lighting.
The chutes are available in 16” short chute and 29” long chute. Easy on/off stainless steel and roto molded chute has a 16” four flute poly spinner to provide you long life and superior spread pattern up to 30’.
Choose a short chute or long chute to go with your V-Box spreader (not included) See Spec chart for measurements.
RVB10
10 Cu. Ft.
185 lbs.
57″
35″
28.5″
44″
49.7″
12 Volt, 1/3 HP 3″ Diameter
12 Volt, 1/2 HP
16″ Diameter Poly Four Flute
16″ Short Chute, 29″ Long Chute
Steel, E Coat, Powder Coat
Standard
Optional
Not Needed
Standard
Standard
Optional
Optional
Optional
RS Digital Control
N/A
Optional
UTV and Larger
Choose a short or long chute for your RVB spreader (not included) Both long and short chute are approximately 30” wide.
Engineered for precise, efficient material control in demanding winter conditions.
Achieve precise material placement and minimize waste with the Sno-Way DRP650 Drop Spreader, featuring an adjustable 30″-36″ drop pattern perfect for targeted deicing. Built with durable stainless steel construction and offering multiple mounting options, this 6 cubic foot capacity spreader delivers efficient performance and versatility for various materials.
Check out our other popular spreaders for your Skid Steer & Tractor, or Receiver Hitch
Variable Wired Speed Control for Drop Spreaders
Sno-Way’s DRP650 features an innovative design that drops melting materials where you want them with a 36″ spread adjustable down to 30”. DRP650 can use a variety of materials quickly and easily, allowing you to place material exactly where it is needed, with little waste of material. Making it the perfect salter or sander for sidewalk type use. Three mounting systems included so you can use it on a variety of machines.
The DRP650 delivers targeted de-icing performance and durable operation across various equipment platforms.
DRP650
6 Cu. Ft.
200 lbs.
29.8″
45.7″
20.3″
Hydraulic
(High Grade Polyethylene) 16” Dia.
Available for Every Job
Please enter your contact information and one of our representatives will get back to you with more information.
